Configure the video processing parameters

Video prefiltering

To configure the video prefiltering parameters, follow these steps:

1. From the Media Processing tab, click the arrow at the right of the Video Pre Filtering section. The video prefilters are displayed.
2. You can configure the video prefilters.
3. Click Save and continue or Save and exit to save your changes.

Video adjustment

To configure the video adjustment parameters, follow these steps:

1. From the Media Processing tab, click the arrow at the right of the Video Adjustment section. The video prefilters are displayed.
2. You can configure the video adjustment parameters.
3. Click Save and continue or Save and exit to save your changes.

Video colorimetry

To configure the video colorimetry parameters, follow these steps:

1. From the Media Processing tab, click the arrow at the right of the Video Pre Filtering section. The video prefilters are displayed.
2. You can configure the video colorimetry parameters.
3. Click Save and continue or Save and exit to save your changes.

Image on frame freeze

To configure a default image that will be displayed in case of frame freeze, follow these steps:

1. From the Media processing tab, go to the Freeze frame management section.
2. Tick the Activate checkbox.
3. Set the appropriate value for each parameter.
4. Click Save and continue or Save and exit to save your changes.

Video metadata

To configure the video metadata parameters, follow these steps:

1. From the Media Processing tab, click the arrow at the right of the Video Metadata section.
2. You can select the Timecode source.
3. You can insert this timecode in the SEI.
4. Click Save and continue or Save and exit to save your changes.

Video watermarking

1. From the Media Processing > Video processing tab, go to the Watermarking section.
2. Tick the Activate checkbox then set the appropriate value for each parameter.
3. Click Ok to validate.
4. Click Save and continue or Save and exit to save your changes.