# Configure the video processing parameters

## Video prefiltering

To configure the video prefiltering parameters, follow these steps:

1. From the **Media Processing** tab, click the arrow at the right of the **Video Pre Filtering** section. The video prefilters are displayed.
2. You can [configure the video prefilters](/beam/live-encoder/parameters/media-processing/video-processing#video-prefiltering).
3. Click **Save and continue** or **Save and exit** to save your changes.

## Video adjustment

To configure the video adjustment parameters, follow these steps:

1. From the **Media Processing** tab, click the arrow at the right of the **Video Adjustment** section. The video prefilters are displayed.
2. You can configure the [video adjustment parameters](/beam/live-encoder/parameters/media-processing/video-processing#video-adjustment).
3. Click **Save and continue** or **Save and exit** to save your changes.

## Video colorimetry

To configure the video colorimetry parameters, follow these steps:

1. From the **Media Processing** tab, click the arrow at the right of the **Video Pre Filtering** section. The video prefilters are displayed.
2. You can configure the [video colorimetry parameters](/beam/live-encoder/parameters/media-processing/video-processing#video-colorimetry).
3. Click **Save and continue** or **Save and exit** to save your changes.

## Image on frame freeze

To configure a default image that will be displayed in case of frame freeze, follow these steps:

1. From the **Media processing** tab, go to the **Freeze frame management** section.
2. Tick the **Activate** checkbox.
3. [Set the appropriate value for each parameter](/beam/live-encoder/parameters/media-processing/video-processing#freeze-frame-management).
4. Click **Save and continue** or **Save and exit** to save your changes.

## Video metadata

To configure the video metadata parameters, follow these steps:

1. From the **Media Processing** tab, click the arrow at the right of the **Video Metadata** section.
2. You can select the **Timecode** source.
3. You can [insert this timecode in the SEI](/beam/live-encoder/parameters/encoding/video#stream-metadata-settings).
4. Click **Save and continue** or **Save and exit** to save your changes.

## Video watermarking

1. From the **Media Processing** > **Video processing** tab, go to the **Watermarking** section.
2. Tick the **Activate** checkbox then [set the appropriate value for each parameter](/beam/live-encoder/parameters/media-processing/video-processing#video-watermark-parameters).
3. Click **Ok** to validate.
4. Click **Save and continue** or **Save and exit** to save your changes.