# Configure the output

MK.IO Beam can output decoded video, audio and data using one or more of the following transport methods for distribution to other devices:

## SDI Output
Broadcast standard for transmitting uncompressed video, audio, and data over coaxial or fiber cables.

## SMPTE ST 2022-6 Output
IP-based standard that encapsulates a complete SDI signal (video, audio, and data) into a single stream.

## SMPTE ST 2110 Output
Native IP standard that transports video, audio, and data as separate, independent streams.

## Transport Stream Passthrough
Convert a satellite feed into an IP UDP multicast transport stream and decrypt the content.

## Output Profile selection
Some output configurations require optimizations to get the best performance. The following **output profiles** are available:

| Output Profile                  | Receiver Service Type                                                            | Other Service Types  |
|----------------------------------|----------------------------------------------------------------------------------|----------------------|
| Standard                         | Recommended for:<br>\- SDI output (all video formats)<br>\- SMPTE ST 2022-6 output (all video formats)<br>\- SMPTE ST 2110 output (SD/HD video formats) | Recommended           |
| SMPTE ST 2110 UHD Output       | Mandatory for:<br>\- SMPTE ST 2110 output (UHD video formats)                  | Not recommended       |

These **output profiles** are optimized for the _Receiver_ service and support mixed output configurations. For other service types, such as _Live Encoding_, use the **Standard** output profile.

## Service Running Blocked by the Current Output Profile
In some cases, a _Receiver_ service may be prevented from starting and entering the _Running_ state. In this case, an alarm is raised indicating that the service configuration is not compatible with the selected **output profile**. Refer to the alarm description for guidance on resolving the issue and bringing the service into the _Running_ state.

For example, if the output profile is set to **Standard** and a UHD receiver service is configured for SMPTE ST 2110 output, a **Service blocked** alarm will indicate that **SMPTE ST 2110 UHD Output** is required. While the alarm is active, the service remains in a _Failed_ state and cannot enter the _Running_ state.

## Configure the Output Profile
To configure the output profile, follow these steps:

1. Select **Appliance** from the left-hand side menu.
2. Click the **Output Profile** tab.
3. Select the appropriate output profile setting from the **Output profile** drop-down menu.
4. Click the **Apply and Reboot** button.
5. A confirmation pop-up window will appear asking, “Are you sure?”
6. Review any warnings or guidance provided. If you are sure, click **Yes, configure and REBOOT!** Otherwise, click **Cancel** to abort.
7. Following the reboot, refresh the web page. The reboot may take a few minutes to complete.