Reliable Transport services configuration and management

Import a Reliable Transport service

Prior importing a service, make sure:

• the format of the file is correct (valid json);
• the service_type field in your configuration file is srt (even though the configuration may be for a Zixi connection);
• the imported service id is different from the existing services;
  • if the same id as an existing service is used, an option to override the existing service will be provided by the import UI.

1. Display services.

You can import files retrieved from a service exported from a different server.

2. Click Import service… and follow the instructions to import Reliable Transport configurations.

3. Once imported, the service(s) appear in the list of services.

Create a new Reliable Transport service

1. Display services.

2. Click Add service

3. Select Reliable Transport. The following page displays:

4. Assign a name to the new service (100 characters max). This name will appear in your Services page, therefore it is recommended to choose a unique name for each service for easier identification from the Services page.

5. Continue the service configuration depending on your needs:

   • SRT connection configuration
   • Zixi connection configuration
   • RIST connection configuration

Configure a Reliable Transport service

SRT or RIST connection configuration

Below is an example of a typical SRT or RIST use case. A single input transport stream is sent via SRT or RIST to multiple clients.

To implement the use case above, the following Reliable Transport services are required:

• 1 service with Input Mode = UDP and Output Mode = SRT Listener or Output Mode = RIST Listener
• 1 service per client with Input Mode = SRT Caller or Input Mode = RIST Caller (respectively) and Output Mode = UDP

It is possible also to have UDP in ->SRT Caller -> SRT Listener -> UDP out. In that case just swap the Output/Input modes for the two services.

Zixi connection configuration

Zixi services can be created to implement the following use case:

Two services are required:

• Service 1 with Input Mode = UDP and Output Mode = Zixi Feeder
• Service 2 with Input Mode = Zixi Receiver and Output Mode = UDP

Reliable Transport parameters

The configuration of the Input and Output section for the service depends on the use case needed.

1. Select the Input Mode from the corresponding drop-down menu on the left side of the Reliable Transport service configuration page.

2. Select the Output Mode from the corresponding drop-down menu on the right side of the Reliable Transport service configuration page.

3. Complete the Input and Output parameters that come with the selected mode:

   • UDP configuration
   • SRT Caller configuration
   • SRT Listener configuration
   • Zixi Feeder configuration
   • Zixi Receiver configuration
   • RIST configuration
   • RTMP Caller configuration
   • RTMP Listener configuration

UDP configuration

Fields marked with * are mandatory.

Input

Output

SRT Caller configuration

SRT Listener configuration

Zixi Feeder configuration

Zixi Receiver configuration

RIST configuration

Input - RIST Caller

Output - RIST Listener

RTMP Caller configuration

RTMP Listener configuration